PH Water Hardness Test Meter , Pen TDS Meter For Water Testing 14.2*2.3*1.3cm
PH Water Hardness Test Meter , Pen TDS Meter For Water Testing 14.2*2.3*1.3cm Description
||2×LR44 Cell Batter
||Water Quality Purity Teste
|Use For 2:
||Use For 3:
water purifier tds meter,
tds checking meter
Yieryi Digital TDS Meter Filter Measuring Water Quality Purity Tester Water tds meter
- Test the quality of various water ensuring you are enjoying the best quality water.
- Ideal for using in the following situations: drinking water water filters hydroponics aquariums food&coffee pools&spas.
- Data hold. Auto temperature compensation.
- Come with a leather case.
||1-9999PPM/mg / L.
||2×LR44 cell batter(not INCLUDE)
- 1* tds-3 meter
- 1*english user manual
- 1*leather bag
Calibration of the pH meter
- 1, the 250ml of distilled water or pure water can use calibration powder. PH electrodes immersed in pH value of mixed phosphate standard 6.86 buffer solution, and gently shake.
- 2, with yellow small screwdriver, facing pH pen behind the round hole, left and right rotation, you can adjust the correction potentiometer, until the display value and standard buffer solution at ambient temperature of pH value of 6.9 consistent.
- 3. Ibid. Insert the electrode into the standard buffer solution of pH4.00 potassium formate two potassium hydrogen phosphate.
- 4, after about two minutes. The display value should be within the allowable range of the error compared with the pH value of the buffer solution.
- Do not stain the liquid, after the calibration with plastic wrap sealed, you can reuse, after correction, with clean water clean, if not often used, can be corrected once in 2-3 months!